| Solare |
| Fully glazed glass door dry jointed frameless partition system using 10 or 12mm glass. Rigid translucent jointing channels provide a seamless aspect unbroken by intrusive mullions. Dry joints make the system fully relocatable with minimum effort. Single and double glazed options are available with blinds and/or manifestation to choice. Glass door Aluminium or harwood head and base tracks provide a range of aesthetic options. Glass and solid doors compliment the glazing in all finishes. The system is fully specified to British Standards for fire, acoustic and impact tests. |
| |
| |
Single Glazed
Head (Timber) |
Single Glazed
Head |
Single Glazed
Base
|
Single Glazed
Dry Lining Abutment |
|
| |
|
| |
| Double Glazed Head |
Double Glazed Base |
|
|
|
| |
|
| |
| Abutment Detail |
Double Glazed Glass Door Frame |
|
|
|
| |
| |
|
|
Double Glazed
Solid Doorframe |
|
| |
Double Glazed 90°
Radius Corner |
Single Glazed 90°
Radius Corner |
Single Glazed
Slimline Doorframe |
|
| |
Single Glazed
Straight Connection |
Single Glazed 3
Way Junction |
Single Glazed
90° Corner |
|
| |
| |
|
Double Glazed
135° Corner |
|
| |
|
| |
 |
|
Wall partition Introduction
A frameless dry glazed partition system with optional glazed or solid doors and accessories.
Wall partition Partition thickness
25mm and 100 mm (nominal) as standard with
glazing thickness either 10mm or 12mm. Other partition thicknesses can be achieved by using single glazed components spaced as required.
Wall partition Heights
Tested up to 3.3 m.
Wall partition Aluminum sections
Material grade 6063 extruded sections in T6 condition conforming to BS 1474 (1987).
Wall partition Aluminum finish
Durable & protective polyester powder coating to 60/80 microns (interior/exterior use). Standard BS or RAL colour range. Other finishes also available.
Wall partition Vertical Joints
Translucent dry jointed vertical glazing sections.
Wall partition Blinds
Integral or remote free-hanging 15mm or 25mm Venetian, roller or 89mm or 127mm louvers.
Wall partition Glazing modules
Nominally 1200 mm,though other widths can be provided to suit the Clients’ requirements/site layouts.
Glass specification Wall partition
10mm or 12mm toughened or laminated complying with BS 6262. Fire rated or acoustic options are also available.
Wall partition Architectural glass
Conforms to BS 6206 available in standard or customized textures and designs. Flat, curved, sandblasted, mirror backed, colored, opaque or translucent options.
Wall partitions
Full height or with an over panel in various widths, manufactured from 10 mm or 12 mm glass, in either single or double leaf and single or double action
Wall partition Timber doors
44 mm standard doors sizes 2040mm high x 826mm wide or 1981mm high x 838mm wide or full height. Other options are also available.
Wall partition Doorframes
Extruded aluminum doorframe pre-mitred and machined to accept lock, lock keep and butt hinges. Timber frames are also available.
Wall partition Fire rating
To BS 476: Part 22: 1987 (clause 8).
Glazing up to 60 minutes integrity, 30 minutes insulation. Timber door sets up to 60 minutes integrity, 30 minutes insulation. Single glazed 30/30 (30 minutes integrity, 30 minutes insulation)
Wall partition Sound rating
To BS 2750: Part 3:1980 and rated in accordance with BS 5281: Part 1: 1984 up to 49 Rw(dB).
Wall partition impact rating
Structurally tested to BS 5234: Part 2: 1992 crowd pressure, general and structural damage by large soft body. Surface damage by small hard body impact.
Wall partition Atrium glazing
Solare single glazed has been approved for atrium glazing.
For further information on product performance and specifications please contact our technical department.
|
|
